MSD Standard Drawings

Drawings in the table below are Adobe PDF files, requiring the free Adobe Reader. If you have questions concerning these drawings, please contact MSD's Engineering and Quality Assurance Section.

For reference, you may also download all MSD Standard Drawings in a single file.

SMU (Stormwater) and Low Pressure Force Main Package drawings are available from the list of Related Links at the right side of this page. A package containing all MSD & Low Pressure Force Main drawings and the MSD CAD Standard document is listed as 'MSD CAD Standard' under Related Links.

DRAWING NAME ACCESSION NUMBER (.pdf)
Standard Drop Manholes
Standard Precast Concrete Drop Manhole
Typical Inverts
Standard Castings for Manholes
Standard Casting Manhole Frame - Type "A"
Standard Lamp Hole
Standard Interceptor Inlet Frame
Standard Interceptor Inlet Grating
Structural Dimensions and Steel Details for Reinforced Junction Chambers
Standard Concrete Collars on Conduits
Control Dimensions for Typical Trenches for Conduits
Typical Building Sewers and Stacks
Standard Manholes on Sanitary Conduits 42" and Under (Type "S")
Standard Key Block
Standard Manhole on Sanitary Conduits - 48" and Over (Type "T")
Standard Precast Concrete Manhole Tee (Type "T" Alternate)
Standard Concrete Cradle and Encasement
Standard Temporary Manhole Cover
Standard Manhole for Sanitary Conduits on Steep Slopes
Modified Type "T" Manholes
Modified Type "S" Manholes
Locking Lid Manhole
Watertight Lid
Special Detail for Laying Two Building Sewers in One Trench
Standard Connection to Existing Brick Sewer
Standard Batter Board
Alternate Batter Board
Self Sealing Manhole Lid
Standard Precast Concrete Manhole Base
Typical Encasement for Existing Sanitary Pipe
Sanitary Manhole Adjustment Using Brick and Mortar Prior to Machine Paving
Sanitary Manhole Adjustment with Precast Concrete Ring and Mortar Prior to Machine Paving
Standard Type "A" Sampling and Gauging Manhole
Standard Type "B" Sampling and Gauging Manhole
Standard Type "C" Sampling and Gauging Manhole
Standard Type "D" Sampling and Gauging Manhole
Standard Type "E" Sampling and Gauging Manhole
Typical Installation of Building Sewer Lateral
Standard Inside Drop Manhole
Standard Grit Chamber
Low Pressure Force Main Typical Receiving Manhole
Standard Separation Manhole
Standard Monitoring Manhole
Standard Building Connection to a Low Pressure Force Main
Standard Symbols
Standard Symbols
Standard Symbols
Standard Symbols
Standard Symbols
Standard Manhole Cover on Elevated Cones
Standard Watertight Manhole Cover on Elevated Cones
Standard Grease Interceptor
Unreinforced Concrete Cap
Standard Two Way Cleanout for Building Sewers
Standard Castings over Two-Way Cleanout
Standard Lid on Private Sewers
Standard Watertight Lid on Private Sewers

Notes:

  • These files are in PDF format, and may be opened using Adobe Reader.

Contact Us

MSD's Customer Call Center:
(513) 352-4900

Contact Information

Adobe Reader

The free Adobe Reader is required for some downloads.

Downloads

All MSD Standard Drawings
(contained in single 3.2 MB PDF)